In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can ensure that nothing will leak when you place the mask on. Be sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask on your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the surface of your dog. Don’t make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are flat and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you will have to do some sanding to be certain it is secure dog facial mask on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.